Part Number Hot Search : 
BR2510 70N1T ADM3075E HAH1340 350CA BB209 MAX585 GM004
Product Description
Full Text Search
 

To Download C4998 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 C4998A1-0004
Nominal Frequency Initial Accuracy (Time of Shipment) : Frequency stabilities
Parameter Crystal Frequency stability Condition
OCXO
10.000 MHz 0.10 ppm @ +2.5 VDC EFC
vs. operating temperature range vs. aging per day vs. aging per year vs. short-term (ADEV) vs. supply voltage Frequency tuning
Parameter
SC
< 10 ppb < 1 ppb/day < 50 ppb/yr <1e-11 < 2.0 ppb
-20 to +85C (ref +25C) after 72 hours on power Tau = 1 sec. 5.0 % change
Value
Condition
Electrical frequency control (EFC): Voltage range Pulling slope Linearity RF output
Parameter
0.5 ppm to 1.0 ppm 0 to 5 VDC Positive 20%
Value
Condition
Signal Harmonics Sub-Harmonics Spurious
+3.0 to +7.0 dBm <-25 dBc NA <-80 dBc
50 Ohms 50 Ohms no vibration, minimal EM field and ripple
Supply Voltage
Parameter Value Condition
Supply voltage Power consumption steady state Power consumption during warm up
+ 5.0 V 5% < 2.0 W < 5.0 W
Typical @ 25 C Typical
Corning Frequency Control Custom Datasheet
Revision Date : 2-16-05 SEM
Date Printed: 2005-02-23
1/2
Corning Frequency Control Inc. 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.corningfrequency.com Corning Frequency Control GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de
C4998A1-0004
Enclosure
Pin 1 2 3 4 5 6 Function Supply Voltage 1 No Connect 2 No Connect Case Ground RF Output EFC
1.500.030 sq 1.00
OCXO
0.58 max
0.030 (0.76) 7 PL.
1 1.00
2
3
6
5
4
0.250
Additional Parameters
Parameter Level Condition
Phase Noise (Static)
Warm-up time
<-102 dBc/Hz <-125 dBc/Hz <-145 dBc/Hz <-153 dBc/Hz <-158 dBc/Hz <-158 dBc/Hz < 5 min
1Hz 10Hz 100Hz 1KHz 10KHz 100kHz To within 0.1 ppm of 1 hour frequency @ 25C
Notes 1 Pin 2 is for Corning internal use: clk. 2 Pin 3 is for Corning internal use: data. 3 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C)
Corning Frequency Control Custom Datasheet
Revision Date : 2-16-05 SEM
Date Printed: 2005-02-23
2/2
Corning Frequency Control Inc. 100 Watts Street Mount Holly Springs, Pennsylvania 17065, USA Tel 1-717-486-3411 Fax 1-717-486-5920 www.corningfrequency.com Corning Frequency Control GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim, Germany Tel +49-7268-801-0 Fax +49-07268-801-281 www.corningfrequency.de


▲Up To Search▲   

 
Price & Availability of C4998

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X